Bullseye Get the app
External display

Bullseye Ballistics External Display

Unique to Bullseye Ballistics is an optional companion device which can be mounted to your rifle or scope. It displays only the pertinent information you need available to you during a trigger press and is configurable to show/hide the info based on your preferences.

The External Display has built-in level and angle sensors and communicates with the Bullseye Ballistics app in real time.

On the display

Information displayed

Not optional
  • Elevation hold
  • Windage hold
  • Level
  • Angle
Optional
  • Range/Distance
  • Time of flight
  • Velocity on target
  • Wind
  • Hit probability
  • Battery percentage

YOU control the display. If you need the text to be larger or brighter, use the app to adjust it to your liking. You can also control the range/distance using the external display buttons.

The built-in level only appears if it detects the rifle is canted left or right and visually assists your re-leveling. Once re-leveled, it stops complaining and returns to displaying whatever information you selected to have displayed (time of flight, wind, hit probability, etc.). The holds always remain displayed regardless of the level status.

Try it

Bullseye Ballistics External Display (simulator)

Tilt the rifle with the Cant slider. Past half a degree, the bottom line turns into a level bar until you are back to level. The shooting angle shows at the top of the display.

1024 yd +3.1° * LINK  72%
▲ 8.03 mil
▶︎ 1.08 mil
1518 fps1.46 s7.0 mph @3
0.0° +3.1°
Angle is amber while moving; holds update once sent

Load: 6.5 Creedmoor, Hornady 140 gr ELD Match, 2710 fps, G7 BC 0.326, 1.75 in sight height, 100 yd zero. Standard atmosphere (59°F, 29.92 inHg), 7 mph wind from 3 o'clock, right-hand twist. Holds come from a point-mass G7 trajectory solved along the line of sight with gravity split by the shooting angle, plus spin drift.

Scope mount

Mount it on your scope

The scope mount clamps to your scope tube and holds the External Display off the side, next to the turrets. Shift your eye, read the display, and you're back behind the glass without breaking position.

Check that you're level, read your elevation and windage holds, and double-check the wind before you press the trigger.

Position

Stay on the gun

No lifting your head and no reaching for a device. The display sits where a quick glance finds it, so you can keep your phone in your pocket.

At a glance

Level, holds and wind

Your holds are always on screen. The level bar appears when the rifle is canted, and the wind info shows if enabled.

Secure

Held snugly in place

The display inserts securely into the sleeve and lips on the sleeve hold it in. A washer on the back adds a magnetic hold. With or without the washer, it stays put even upside down.

How it attaches

Close-up of the mount: a black ring clamped around the scope tube with two screws, carrying a sleeve with the External Display in it out to the side.
Clamps to the tube

A ring closes around the scope tube with two screws and carries the sleeve out to the side.

The back of the mount: the External Display seated in the sleeve, with a round washer in the middle of the sleeve's back.
Slides into a sleeve

Lips on the sleeve securely hold the display in. The washer on the back adds a magnetic hold, and you can leave it off.

Top-down view of a scope in its rings. The mount sits on the tube just ahead of the front ring, with the display standing off the side, clear of the turrets.
Clear of the turrets

Seen from above: the display hangs off the side of the scope, out of the way of the turrets.

On the rifle

Close-up of the External Display in the mount outdoors, reading 1024 yd, 8.21 mil up and 0.64 mil right, with the level bar along the bottom showing 1.4 degrees.
What you see - live feed

At 1024 yd: hold 8.21 mil up and 0.64 mil right. The level bar along the bottom shows a 1.4° cant - you should probably fix that.

Side view of a rifle with the External Display mounted beside the scope, facing back toward the shooter.
Not just a screen mirror

Onboard sensors detect rifle cant (level) and shot angle. It's constantly in contact with the Bullseye Ballistics solver via bi-directional communications, telling the solver the precise shot angle so the solver can account for every single little detail before they stack and become a problem.